This is the FIRST in a series of responses from my e-mail archives, which I’m publishing because the Recruiters noted them as helpful advise and perspective on their client’s Welding Engineering positions. Most recruiters and even most HR Managers have little experience or exposure to the Welding Engineering segment because it’s so small. It’s my hope that these will help increase understanding of some of the realities, needs, obstacles and rewards in finding and retaining degreed welding engineers.
Regarding the “#41XXX Welding Engineer Position”, if I could offer some advice for your client as a degreed W.E. with 21 years experience who has interviewed roughly 200 Welding Engineers to hire about 10 W.E.’s in the last 5 years…
A salary range of $44-55k is unrealistic for a degreed Welding Engineer with 3-5 yrs experience unless their cost of living is 20-50% below the national average.
There are only three ABET accredited W.E. universities in the nation: LeTourneau University, Ferris State University, and The Ohio State University. At OSU (for example), the average starting salary is about $60k for a brand new (2008) graduate. Recent LeTourneau University graduate majors are Materials Joining Engineering instead of Welding Engineering. After 3 years experience, average 2nd position starts at about $70k. With 5 yrs experience, a good degreed W.E. with the capabilities they’re looking for is likely going to be in the $65-$80k range.
Keep in mind that there are only about 100 W.E. graduates a year, totaled from the 3 schools. That’s why about 70% of the “Welding Engineers” in industry are only titled as W.E.’s. Those 70% are people, some with other engineering degrees and some with none, who can ENABLE the welding processes. However, of the 30% of degreed Welding Engineers, only about half of them can optimize processes for excellent profitability and quality. That’s why the best W.E.’s, with experience, make $75-120k base salaries: they are the only ones who can make profitability differences measured in millions of dollars.
Most recruiters and even most HR Managers have little experience or exposure to the Welding Engineering segment because it’s so small. So I hope that helps. If you have any other W.E. position openings that could benefit from strong expertise with a history of dramatic process improvements beyond the “benchmark” performance standards, let me know…